Loading...

Baths

About 1

CONSTANT TEMPERATURE REFRIGERATED LIQUID BATH

Outer body is made of thick mild steel sheet duly powder coated painted and inner chamber is made up of 304 grade Stainless Steel. Lid is also double walled properly insulated and is with locking facility. Whole unit is mounted on a sturdy angle iron frame The cooling coils are brazed to the outer side of S.S. chamber thus ensuring perfect and uniform cooling. Insulation is done with thick glass wool to prevent any temp. loss. For attaining the temp. below ambient, the refrigeration is done through CFC FREE hermetically sealed compressor and & for attaining the temp. above ambient, heating is done with immersion type heating element .Fitted with stirrer for temperature uniformity throughout the chamber. Temperature range is from 5°C to 90°C is controlled by Dual Display Microprocessor PID Digital Temperature Indicator cum Controller with a accuracy of ± 0.5° C Digital temp. To work on 220/230 volts AC supply. The unit is also fitted with a FHP PUMP for circulating the cooled liquid to an external source such as condenser coils, etc.

Category: HTI

Baths: 141

Chamber Size In mms

  • 500 x 250 x 250

Capacity

  • 32.5 L
About 1

LOW TEMPERATURE REFRIGERATED LIQUID BATH

Outer body is made of thick mild steel sheet duly powder coated painted and inner chamber is made up of 304 grade Stainless Steel. Lid is also double walled properly insulated and is with locking facility. Whole unit is mounted on a sturdy angle iron frame The cooling coils are brazed to the outer side of S.S. chamber thus ensuring perfect and uniform cooling. Insulation is done with thick glass wool to prevent any temp. loss. For attaining the temp. below ambient, the refrigeration is done through CFC FREE hermetically sealed compressor and & for attaining the temp. above ambient, heating is done with immersion type heating element .Fitted with stirrer for temperature uniformity throughout the chamber. Temperature range is from 5°C to 90°C is controlled by Dual Display Microprocessor PID Digital Temperature Indicator cum Controller with a accuracy of ± 0.5° C Digital temp. To work on 220/230 volts AC supply. The unit is also fitted with a FHP PUMP for circulating the cooled liquid to an external source such as condenser coils, etc.

Category: HTI

Baths: 142

Chamber Size In mms

  • 500 x 250 x 250

Capacity

  • 32.5 L
About 1

OIL BATH (High Temp.) With Stirrer

Thermostatically controlled. Double walled. Complete with stirrer. Temperature range 250˚ C. Workable on 220 V AC 50 Hz Single phase.

Category: HTI

Baths: 139

Chamber Size In mms

  • 250 x 250 x 250
  • 250 x 250 x 250
  • 350 x 350 x 250
Optional Extra Cost
  • Microprocessor PID digital temp. indicator cum controller
  • Chamber Size In inch

    • 10″ x 10″ x 10″
    • 12″ x 12″ x 10″
    • 14″ x 14″ x 10″
    About 1

    SEROLOGICAL WATER BATH

    These units are double walled with inner chamber made up of S.S. Sheet and outside of M.S. duly powder coated. The gap between the walls is fitted with special grade glass wool in order to avoid thermal losses. The inner chamber fitted with immersion type heating element is covered with perforated removable diffuser tray. The cover is provided with the unit as a standard accessory. Temperature from ambient to 100˚ C is controlled by Hydraulic capillary type thermostat with accuracy of ± 1˚ C. Workable on 220 V AC 50 Hz Single phase.

    Category: HTI

    Baths: 134

    Chamber Size In mms


    • 300 x 175 x 175
    • 300 x 250 x 175
    • 375 x 300 x 175
    • 455 x 300 x 175
    • 605 x 300 x 175

    Suitable Racks

    • 1 racks
    • 2 racks
    • 4 racks
    • 6 racks
    • 8 racks

    Cap. (apr.)

    • 12L
    • 14L
    • 18L
    • 25L
    • 32L
    About 1

    WATER BATH INCUBATOR SHAKER

    Similar to other water baths but fitted with inbuilt shaker for different experiments demanding shaking at constant speed under controlled temperature conditions. The temp. is controlled by capillary type thermostat from ambient to 100˚ C RPM range :- 40-140 with variable electronic speed regulator Workable on 220 V AC 50 Hz Single phase.

    Category: HTI

    Baths: 140

    Chamber Size In mms

    • 405 x 300 x 150
    • 405 x 300 x 150
    Optional Extra Cost
  • Digital RPM Meter
  • Capacity

    • 12 L
    • 18 L
    About 1

    WATER BATH PRECISON (Constant Temp. Control)

    Thermostatically controlled. Double walled. Toughened glass windows on two opposite sides for observations without disturbing temperature. Complete with stirrer. Temperature range 100˚ C. Workable on 220 V AC 50 Hz Single phase.

    Category: HTI

    Baths: 137

    Chamber Size In mms

    • 425 x 250 x 225
    • 425 x 375 x 375
    • 650 x 450 x 450
    Optional Extra Cost
  • Auto Cut Off Device when water level is low
  • Chamber Size In inch

    • 17″ x 10″ x 9″
    • 17″ x 10″ x 9″
    • 24″ x 18″ x 18″
    About 1

    WATER BATH RECANGULAR (Double Walled)

    It is a double walled unit with inner chamber made up of S.S. Sheet and outside of M.S. duly powder coated. The gap between the walls is fitted with special grade glass wool in order to avoid thermal losses. The concentric rings can be removed to accommodate containers of various sizes. Temperature from ambient to 100˚ C is controlled by Hydraulic capillary type thermostat with accuracy of ± 1˚ C. Workable on 220 V AC 50 Hz Single phase.

    Category: HTI

    Baths: 135

    Chamber Size In mms


    • 300 x 250 x 100
    • 355 x 405 x 100

    Holes

    • 6 holes of 75 mm
    • 12 holes of 75 mm

    Cap. (apr.)

    • 8L
    • 15L
    About 1

    WATER BATH RECANGULAR (Single Walled)

    It is a double walled unit with inner chamber made up of S.S. Sheet and outside of M.S. duly powder coated. The gap between the walls is fitted with special grade glass wool in order to avoid thermal losses. The concentric rings can be removed to accommodate containers of various sizes. Temperature from ambient to 100˚ C is controlled by Hydraulic capillary type thermostat with accuracy of ± 1˚ C. Workable on 220 V AC 50 Hz Single phase.

    Category: HTI

    Baths: 136

    Chamber Size In mms


    • 300 x 250 x 100
    • 355 x 405 x 100

    Holes

    • 6 holes of 75 mm
    • 12 holes of 75 mm

    Cap. (apr.)

    • 8L
    • 15L
    About 1

    WATER BATH TISSUE FLOTATION

    Double walled round construction. Inner chamber Stainless Steel/black anodized aluminum and outer made out of mild steel painted in epoxy powder coating. Thermostatic control, temperature range from ambient to 80 deg C. Complete with indicators, wire & plug. To work on 220 V AC.

    Category: HTI

    Baths: 138

    Chamber Size In mms (dia x depth)

    • 200 x 75
    • 250 x 125