Sec-45C, Chandigarh +91-8360308092 info@hticoinstruments.com

Incubators

  1. Home
  2. Incubator
About 1

EGG INCUBATOR

Exterior fabricated out of thick mild steel duly finished with powder coating. The gap between the walls is fitted with special grade glass wool. Temperature from 30° C to 700° C ± 1° C controlled by hydraulic type capillary thermostat. The unit is provided with manual tilting device, so to tilt the tray holding the eggs.
An L – shaped prismatic thermometer is fitted to the unit for reading the chamber temperature. Equipment suitable to be working on 220V AC 50Hz single phase.

Category: HTI

Incubators: 113

Capacity

  • 50 eggs
  • 100 eggs
  • 200 eggs
  • 250 eggs
About 1

EGG INCUBATOR (AUTOMATIC TILTING)

Exterior fabricated out of thick mild steel duly finished with powder coating. The gap between the walls is fitted with special grade glass wool. Temperature from 30° C to 700° C ± 1° C controlled by hydraulic type capillary thermostat. The unit is provided with manual tilting device, so to tilt the tray holding the eggs.
An L – shaped prismatic thermometer is fitted to the unit for reading the chamber temperature. Equipment suitable to be working on 220V AC 50Hz single phase.
Fitted with:
MICROPROCESSOR DIGITAL PID TEMPERATURE INDICATOR CUM CONTRROLLER WITH TEMPERATURE ACCURACY ± 0.5° C.
FITTED WITH AUTOMATIC TILTING DEVICE WITH GEARED DC MOTOR TO TILT THE TRAY HOLDING EGGS.
FITTED WITH MICROPROCESSOR BASED DIGITAL 7 DAYS CYCLIC TIMER.

Category: HTI

Incubators: 114

Capacity

  • 50 eggs
  • 100 eggs
  • 200 eggs
  • 250 eggs
About 1

HYBRIDIZATION INCUBATOR

Double walled Inside chamber made of Stainless Steel, outer made of M.S. Sheet duly powder coated. Temperature Range 5°C above ambient to 90°C controlled by Dual Display Microprocessor PID Digital Temperature Indicator cum Controller. Provided with a carrier to hold 6 nos. of bottles with size 60mm dia x 200mm depth and it rotates at speed of 2 to 16 rpm. Provided with Air circulation fan to ensures temperature uniformity. Provided with glass window in the door to inspect the chamber. Works on 20/230Volts AC.

Category: HTI

Incubators: 109

Temp Range

  • Ambient to 90˚
  • 5˚ to 90˚

RPM Range

  • 2-16 RPM
  • 2-16 RPM
About 1

INCUBATOR B.O.D. (BIO-CHEMICAL OXYGEN DEMAND)

Designed for low temperature incubation and routine determination of Bio-chemical oxygen demand (B.O.D.). For work in lower temperature a cooling unit is provided at the lower portion of the working chamber and heating arrangement has been made in the inner chamber for work of higher temperature. The temperature varies from 5° C to 60° C adjustable at any desired point by Dual Display Microprocessor PID Digital Temperature Indicator cum Controller with a accuracy of ± 0.5° C. Air circulation fan provided to keep the temperature uniform inside the chamber. Inner chamber is made up of anodized aluminium or stainless steel sheet. Supplied with two/three removable perforated shelves. Exterior made of thick mild steel duly finished in powder coating. Double wall door is provided with magnetic gasket and lock & key arrangement. Inner door made out of clear acrylic sheet allowing inspection of material in the chamber without disturbing the chamber temperature. Door operated inner illumination has been provided. Incubator to work on 220 V AC 50 Hz single phase.

Category: HTI

Incubators: 110

Chamber Size In mms


  • 455 x 410 x 610
  • 505 x 415 x 830
  • 565 x 565 x 865
  • 650 x 580 x 900
  • 700 x 650 x 900

OPTIONAL (EXTRA COST)

  • Timer 0-24 hours
  • Automatic Voltage Stabilizer 3-5 KVA (Most Rec.)
  • Internal illumination with 3 flurescent tubes

    • Cap. (cu.ft.)

    • 4
    • 6.1
    • 10
    • 12
    • 15

    Cap. (apr.)

    • 112L
    • 171L
    • 280L
    • 336L
    • 420L
    About 1

    INCUBATOR BACTERIOLOGICAL (DELUXE MODEL)

    The Deluxe Model Bacteriological Incubator is designed for precise incubation of bacterial cultures in laboratories. It features double-wall construction with inner stainless steel and outer mild steel painted with epoxy powder for durability. Insulated with glass wool, it maintains consistent temperatures. Equipped with forced air circulation, it ensures uniform temperature distribution from 5°C above ambient to 60°C, controlled by a digital temperature controller with ±0.5°C accuracy. The transparent glass door allows for easy observation without disturbing the environment. It operates on 220V AC, 50Hz, single-phase power, and is ideal for microbiology, bacteriology, and other research applications.

    Category: HTI

    Incubators: 108

    Chamber Size in mms/inches

    • 300 x 300 x 300 (12″ x 12″ x 12″)
    • 350 x 350 x 350 (14″ x 14″ x 14″)
    • 400 x 400 x 400 (16″ x 16″ x 16″)
    • 450 x 450 x 450 (18″ x 18″ x 18″)
    • 600 x 450 x 450 (24″ x 18″ x 18″)
    • 600 x 450 x 450 (24″ x 18″ x 18″)
    • 900 x 600 x 600 (36″ x 24″ x 24″)
    • 900 x 600 x 450 (36″ x 24″ x 18″)
    • 900 x 900 x 900 (36″ x 36″ x 36″)
    Optional Extra Cost
  • Timer 0-24 hours

    • Cap. (App.)


    • 28 L
    • 45 L
    • 65 L
    • 95 L
    • 125 L
    • 224 L
    • 252 L
    • 336 L
    • 720 L
    About 1

    INCUBATOR BACTERIOLOGICAL THERMOSTATIC

    A Thermostatic Bacteriological Incubator is essential for cultivating bacteria and other microorganisms in laboratory settings. It features a double-wall design with inner stainless steel and an insulated outer casing for temperature stability. Equipped with a thermostat, it maintains precise temperatures ranging from ambient +5°C to 60°C. Forced air circulation ensures even temperature distribution. The transparent glass door allows for easy monitoring without disrupting the internal environment. Typically operating on 220V AC, 50Hz, single-phase power, this incubator is ideal for microbiological, bacteriological, and other research applications, ensuring consistent and reliable incubation conditions.

    Category: HTI

    Incubators: 107

    Chamber Size in mms/inches

    • 300 x 300 x 300 (12″ x 12″ x 12″)
    • 350 x 350 x 350 (14″ x 14″ x 14″)
    • 400 x 400 x 400 (16″ x 16″ x 16″)
    • 450 x 450 x 450 (18″ x 18″ x 18″)
    • 600 x 450 x 450 (24″ x 18″ x 18″)
    • 600 x 600 x 600 (24″ x 24″ x 24″)
    Optional Extra Cost
  • Timer 0-24 hours
  • Air circulating fan

    • Cap. (App.)


    • 28 L
    • 45 L
    • 65 L
    • 95 L
    • 125 L
    • 224 L
    About 1

    ORBITAL SHAKING INCUBATOR (VERTICAL DELUXE MODEL)

    Outer made of M.S. Sheet powder coated & inner chamber is made of thick S.S. Sheet. The gap between two walls is fitted with high grade glass wool. The glass window makes it possible to inspect the specimen without disturbing the inner Temperature. The unit has a temp. Range from ambient to 60˚. The Temperature is controlled by Dual Display Microprocessor PID Digital Temperature Indicator cum Controller with a accuracy of ± 0.5° C. Air circulation fan is provided to maintain stability throughout. The speed of shaker is variable from 30 RPM to 250 RPM. The tray of the shaker is also made of S.S. Sheet with Lotus type clamps to hold flasks. The unit is fitted with Digital RPM meter, 999 min digital time.

    Category: HTI

    Incubators: 111

    Capacity


    • 16 flasks of 250 ml

    OPTIONAL (EXTRA COST)

  • Timer 0-24 hours
  • 16 flasks of 100 ml instead of 9 flasks of 250 ml
  • 9 flasks of 500 ml or 25 flasks of 100 ml instead of 16 flasks of 250 ml

    • Temp Range

    • Ambient to 60˚

    Rpm Range

    • Upto 250 RPM
    About 1

    ORBITAL SHAKING INCUBATOR—Cum--BOD Incubator

    Orbital shaking incubator Cum B.O.D incubator is specifically designed to controlled incubation with orbital shaking arrangement with powerful geared motor for many laboratory procedures such as tissue culture, fermentations studies, enzyme reactions, growth studies etc. The outer chamber is made up of M.S. Sheet duly powder coated & inner chamber is made of thick S.S. Sheet. The gap between walls is fitted with high grade glass wool to avoid thermal loss. The plexi glass window provided to inspect the specimen without disturbing the inner Temp. The incubator is illuminated with one door operated or panel operated flurescent tube. The unit has a temp. Range from 5˚C to 60˚C. The Temperature is controlled by Dual Display Microprocessor PID Digital Temperature Indicator cum Controller with a accuracy of ± 0.5° C. Air circulation fan is provided to maintain stability throughout. The speed of shaker is variable from 30 RPM to 250 RPM. The tray of the shaker is also made of S.S. Sheet with Lotus type clamps to hold flasks. The unit is fitted with Digital RPM meter, 999 min digital time.

    Category: HTI

    Incubators: 112

    Capacity


    • 16 flasks of 250 ml
    • 25 flasks of 250 ml
    • 36 flasks of 100 ml

    OPTIONAL (EXTRA COST)

  • Timer 0-24 hours
  • Automatic Voltage Stabilizer 3KVA (Most Rec.)

    • Temp Range

    • 5˚ to 60˚

    Rpm Range

    • Upto 250 RPM

    Htico Instruments: Precision instruments for scientific and medical advancements worldwide.

    Quick Links

    About Us Our Products Gallery Faq's Our Contact Us

    What We do

    All Products Medical Instruments Surgical Instruments Pharmaceutical Instruments Laryngoscope Sets & Repairs

    Contact Info

    Sec-45C, Chandigarh Sale@hticoinstruments.com info@hticoinstruments.com +91-9779772707 +91-8360308092
    Htico Instruments, All right reserved.
    Distributed By Bitsbuck @ 2024